A：The total amount of puff draws throughout the life of the device. non-resettable
SXmini SL Class V2
ARE YOU OF LEGAL SMOKING AGE ?
A：The total amount of puff draws throughout the life of the device. non-resettable
A：Optional – You can set your average room temperature for added accuracy if needed.
A：there are two methods to lock the resistance:
1. Auto Lock (Auto sense ohm lock) - the device will enter a 10-minute analyzing phase to check whether the coil resistance reached room temperature and locks it.
2. Manual OHM Lock - will manually lock the resistance at the current temperature. Please make sure the coil is at room temperature before manually locking it.
A：choose the temperature preset in the main screen (while in temp mode) and push the joystick right to enter its configuration page. Adjust the temperature and power (volt) to your preference.
A:The Dynamic module allows for higher and lower temperature stripes, bringing better flavor while protecting from a dry hit. If you focus on maintaining the temperature limit, the Constant module will ensure the temperature will not bypass the set limit.
A：Before you start using temp control, the coil resistance must be registered / locked while at its room (base) temperature state.
Locking the resistance AFTER usage, while hot or above room temperatures lead to miscalculation and poor performance.
A：SL2 features an easy step-by-step temp control configuration workflow. Enter the Temp-Mode in the main menu to follow the configuration guide.
A：Choose SXi-EQ 1, 2, or 3 to configure and edit your own custom curve.
A：Smart curves allow you to manipulate power through time. The curves are percentage-based and can be used globally on all coil types without additional adjustments.
A：SL2 is not firmware up-gradable
© 2010-2024 Copyright Dongguan Yihi Electronic Co.,ltd. All Rights Reserved. | 粤ICP备14098942号 | STARKAY
